Ansys Fasih
Ansys Fluent - Enterprise Fluid Simulation Software
Ansys Fluent is general-purpose CFD software for problems where flow, heat or chemistry determine whether a design performs. Will a heat sink hold a chip below its limit? Will a burner meet its emissions target? Will a tank mix in time? Fluent answers these questions in simulation, before anything is built.
Turbulence, heat transfer, multiphase and reacting flow are handled in a single solver and a single-window workflow. Fluent is licensed through the Ansys CFD plans, and the right plan depends on your physics and model sizes, which is where we begin every engagement.
Ansys Fluent 2026 R1
- Penyelesai GPU yang lancar: isipadu bendalir (VOF) dengan tenaga dan jaringan gelongsor kini dijalankan pada GPU, untuk simulasi berbilang fasa yang lebih pantas seperti pencampuran dan pemutaran jentera.
- Pembakaran pada GPU: pecutan kimia memberikan penyelesaian sehingga 2-3x lebih pantas untuk mekanisme tindak balas yang keras.
- Ketepatan hibrid: penggunaan memori GPU yang lebih rendah pada ketepatan yang sama, jadi simulasi yang lebih besar muat pada GPU yang lebih sedikit.
Baca lebih lanjut: Apa yang Baharu Merentasi Ansys Fluids pada 2026 R1
Ansys CFD Enterprise
Fluent with its native multi-GPU solver, alongside every other Ansys fluids solver.
The plan for teams that need the full range of fluids solvers and specialist tools under one licence.
Ansys CFD Premium
Fluent's full physics range on CPUs, together with Ansys CFX.
Suited to experienced CFD engineers who need validated results across turbulence, heat transfer, multiphase and reacting flow.
Ansys CFD Pro
Fluent for everyday flow and heat transfer problems, at a lower entry cost.
Fluent Applications: Cooling, Process, Combustion and Batteries
- Electronics and e-motor cooling: airflow and conjugate heat transfer through enclosures, heat sinks and motors cooled by air, water or spray.
- Process equipment: stirred tanks, mixers, separators and sprays.
- Combustion and emissions: burners, furnaces and reacting flows, using validated combustion models.
- Aerodynamics and HVAC: vehicles, fans, ducts and building ventilation.
- Batteries: electrochemistry and thermal management, with reduced-order models for system studies.
Multiphase Physics, GEKO Turbulence and Task-Based Meshing
Few industrial problems involve a single fluid phase. Fluent models gas-liquid, liquid-liquid and gas-solid flows, boiling and condensation, free surfaces with volume of fluid (VOF), and heat moving through solids and fluids together. The GEKO turbulence model has tunable coefficients, so it can be calibrated to a given class of flow.
Task-based meshing workflows take both clean and imperfect CAD to a solver-ready mesh, and meshing and solving both run in parallel. For fluid-structure interaction, Fluent works alongside Ansys Mechanical.
Fluent Native Multi-GPU Solver
Fluent's native multi-GPU solver runs cases on graphics cards rather than CPU cores, and on large meshes it can reduce an overnight run to a same-day result. Not every model benefits equally, so we recommend benchmarking representative cases before investing in hardware.
Topik Rundingan CFD Biasa
- Cleanroom airflow: air change rates, airflow direction, pressure differentials and particle concentration against the cleanroom class.
- Data centre and server room cooling: rack inlet temperatures, hot spots and cooling capacity.
- HVAC and building ventilation: air distribution, thermal comfort and fresh-air effectiveness.
- Electronics enclosure cooling: fan, vent and heat sink layout against component temperature limits.
- Pumps, fans and mixing vessels: flow rate, pressure drop and mixing performance.
Ada projek di luar senarai ini? Hantarkan spesifikasi kepada kami. Sekiranya sesuatu kajian memerlukan pengetahuan pakar, kami menggunakan rangkaian rakan kongsi Ansys kami yang lebih luas.
Produk Berkaitan
- Ansys CFD: the licence plans (Pro, Premium, Enterprise) through which Fluent is supplied.
- Ansys CFX: a separate CFD solver specialised for turbomachinery; included in CFD Premium and Enterprise.
- Ansys Icepak: electronics cooling in Ansys Electronics Desktop, built on the Fluent solver.
- Ansys Rocky: discrete element (DEM) particle simulation that couples with Fluent.
- Ansys HPC Packs: additional cores and GPUs for faster solves on any plan.
Ansys Fluent FAQ
Do I need a GPU to run Ansys Fluent?
No. Fluent runs on standard CPUs. The GPU solver is an option for supported models where run time is critical.
Can we evaluate Fluent before buying?
Yes. Ansys offers a free 30-day Fluent trial, and our CFD team can help set up a first model during the evaluation.
Ansys Fluent Training Courses
- CFD 101 - Latihan Pengenalan CFD Ansys
- CFD 201 - Latihan Interaksi Struktur Bendalir (FSI) CFD Multifizik Ansys
- CFD 202 - Latihan Pemindahan Haba Konjugat CFD Multifizik Ansys
- CFD 203 - Latihan Berbilang Fasa CFD Lancar Ansys
- CFD 204 - Latihan Pemindahan Haba CFD Lancar Ansys
- CFD 205 - Latihan Mesin Berputar CFD Lancar Ansys
- CFD 206 - Latihan Pemodelan Mesh Dinamik CFD Lancar Ansys
- CFD 207 - Latihan Turbulensi CFD Lancar Ansys
- CFD 208 - Latihan Pengangkutan & Pembakaran Spesies CFD Lancar Ansys
See all CADIT training courses
Kemas kini Okt '26 oleh Pasukan CFD CADIT Ansys.

Kepakaran Barisan Produk
Rakan kongsi saluran menjalani latihan dan ujian yang ketat untuk menerima pensijilan barisan produk.
CADIT berbangga untuk menyediakan perkhidmatan yang diperakui kepada pelanggan kami dalam 5 Kategori Barisan Produk Ansys.
Kami menyediakan beberapa pilihan latihan khusus bersubsidi & perkhidmatan berkualiti untuk pelanggan di bawah jagaan kami.




